Pesticide residue and intake control
Pre-harvest intervals, spray records and sample analysis: a workable routine for managing residue risk at the moment of intake.
The risk starts in the field and is caught at the gate
The label of every plant protection product states a waiting period that must pass between the last application and harvest. In produce where this period is not respected, residue can go above the legal limit.
The factory cannot see the field. What it can see is the load that arrives at the gate and the information that comes with it. That is why residue control should be built in as part of the intake process.
Three layers of control
The first layer is the declaration: the grower states the date of the last spray and the product used. The second layer is a rule: a load that arrives with a declaration whose waiting period has not yet passed is flagged separately. The third layer is analysis: laboratory samples are taken from loads that look risky and from loads picked at random.
The declaration alone is not enough, but it tells you where to focus the analysis.
The record protects the decision
When a load is turned away or accepted with conditions, the reason for the decision and the person who made it should go on record. If an objection comes later, that record is the only thing you can rely on.
In TrackOn Queue, the analysis and intake decision for every load are written to the truck's record, along with the person who made them. Adding the grower's declaration and the waiting-period rule to the intake screen is planned together with the factory's own rules.